DRILLMAX® 350 RIG

DRILLMAX® 350 Fast & Versatile Water Well Rig

The DRILLMAX® 350 is mounted on a 33,000 gvw with 4×2 or 4×4 option.  The DRILLMAX® 350 is a very fast versatile water well rig.  The rig can be set up to do small 2-in.-4-in. water wells but also capable of drilling the 6-in.-8-in. water wells under 500-ft. deep.  Many options are available for the mud pump and air compressor allowing you to customize the rig to your specific needs.

Specifications

DRILLMAX 350 Water Well Rig

Watch the video below to see the DRILLMAX® 350 in action!

 

SUB FRAME
Construction: 15 ft. in length
Component supporting sub frame with aluminum cover plates to minimize weight and deter corrosion.
MAST
Construction: 29 ft. 6in.  length
Sealed bearing hoisting system with internally protected cylinder.
Retract table provides 16 ft. opening.
DRILL POWER
PTO driven by heavy-duty oil flooded pump drive gear case with direct coupling to all hydraulic pumps.
HYDRAULIC SYSTEM
Independent systems for each main circuit allowing for continuous drilling operations while handling drill pipe.
Includes 85 gal. hydraulic tank with oil cooler and filtration.
FEED SYSTEM
Type: Hydraulic cylinder with leaf chain drive
Stroke 24 ft.
Rated Pullback* 15,000 lbs.
Rated Pulldown Pressure 10,000 lbs.
ROTARY HEAD
Type: Top drive oil flooded gearbox with integral 2 in. adjustable swivel
Speed: Available up to 300 RPM
Torque: Available up to 48,000 in-lbs.
STANDARD PIPE HANDLING EQUIPMENT
Holding wrench Air Operated
Breakout Cylinder Hydraulic cylinder with 36 in. adjustable wrench
Winch 7,500 lbs. capacity with 100 ft. x 1/2 in. non-rotating wire rope and safety hook
JIB Boom Hydraulically swings and extends to center over pipe rack loader
LEVELING JACKS
Rear Two 30 in. stroke
Front Two 36 in. stroke
TRUCK CHASSIS
Ford F-750, 250 H.P. Diesel with 6 speed transmission, 4×4 conversion available
International 7300 4×4
WEIGHT
Approximate operating weight – 30,000 lbs.
Equipped with 3×4 Centrifugal and 300/200 Air
DIMENSIONS
Length 30 ft.
Width 8 ft.
Height 10 ft. 6 in.
OPTIONAL EQUIPMENT
Mud Pump: Hydrastatic driven up to 5 x 6 Duplex or 3 x 4 x 13 Centrifugal
Air Compressor: Hydrastatic driven 300 CFM at 200 PSI
*When used with Duplex Pump
Drill Pipe Rack for 300 ft. of 2 7/8 in. x 20 ft.
CMAX Semi-Automatic drill pipe loading system with up to 15 pieces (300 ft) 2 7/8 in. drill pipe

Photo Gallery

Click on a photo to view a larger version.

Literature

Find Out More

Fill out the contact form below to find out more about this rig.


DRILLMAX® 250DRILLMAX® 350DRILLMAX® 400DRILLMAX® 450DRILLMAX® 2400DRILLMAX® 2500General InformationUsed Machines

Contact us

DRILLMAX®
5801 SW 6th Place
Ocala, FL 34474

Phone: (352) 854-1566
Fax: (352) 237-0450

Follow Us