DRILLMAX® 2500 RIG

DRILLMAX® 2500 Truck Mounted Water Well & Geothermal Drill Rig

The DRILLMAX® 2500 Water Well & Geothermal Drill Rig is the only tophead drive truck mounted drill rig with a 30” retract table.  With 60,000 lbs of pullback and a 23,000 lb winch that can be 3 parted, the DRILLMAX® 2500 has capabilities of drilling 2000’ deep.  A versatile rig that can be used for large diameter domestic wells or shallow oil and gas.  Set the rig up with large piston mud pumps or big air up to 1170/350.

Specifications

2500 Truck Mounted Water Well & Geothermal Drill Rig

SUB FRAME
Construction: 22 ft. in length, 8 ft. in width
Component supporting sub frame with integral retractable table providing 30 in. opening for casing placement.
MAST
Construction: 40 ft. length
Sealed bearing hoisting system with internally protected cylinders.
DRILL POWER
PTO driven by heavy-duty oil flooded pump drive gear case with direct coupling to all hydraulic pumps.
HYDRAULIC SYSTEM
Independent systems for each main circuit allowing for continuous drilling operations while handling drill pipe.
Includes 140 gal. hydraulic tank with oil cooler and filtration.
FEED SYSTEM
Type: Hydraulic cylinder with leaf chain drive
Stroke 28 ft.
Rated Pullback* 60,000 lbs.
Rated Pulldown Pressure 30,000 lbs.
ROTARY HEAD
Type: Top drive oil flooded gearbox with integral 3 in. adjustable swivel
Speed: Available up to 300 RPM
Torque: Available up to 120,000 in-lbs.
STANDARD PIPE HANDLING EQUIPMENT
Holding wrench Air Operated
Breakout Cylinder Hydraulic cylinder with 60 in. adjustable wrench
Winch 23,000 lbs. capacity with 250 ft. x 5/8 in. non-rotating wire rope and safety hook set up with 3 part sheave assembly
JIB Boom Hydraulically swings and extends to hole center and pipe loader
LEVELING JACKS
Rear Two 36 in. stroke
Front Two 48 in. stroke
Stabilizer Two 20 in. stroke
TRUCK CHASSIS (Standard)
IHC 5900 Series with 425 HP, 13 speed transmission
WEIGHT
Approximate operating weight 66,000 lbs.
Equipped with 1170/350 Air
DIMENSIONS
Length 42 ft.
Width 8 ft.
Height 13 ft. 5 in.
OPTIONAL EQUIPMENT
Mud Pump: Hydrastatic driven up to 7 1/2 x 8 Duplex
Air Compressor: Hydrastatic driven 500 CFM at 200 PSI or 1170/350 with self-contained power unit
Drill Pipe Rack for 500 ft. of 3 1/2 in. x 20 ft. Pipe
Single Rod Loaders or Casing Hammer Package
*May require carrier due to weight

Photo Gallery

Click on a photo to view a larger version.

Literature

Find Out More

Fill out the contact form below to find out more about this rig.


DRILLMAX® 250DRILLMAX® 350DRILLMAX® 400DRILLMAX® 450DRILLMAX® 2400DRILLMAX® 2500General InformationUsed Machines

Contact us

DRILLMAX®
5801 SW 6th Place
Ocala, FL 34474

Phone: (352) 854-1566
Fax: (352) 237-0450

Follow Us