DRILLMAX® 2400 RIG

DRILLMAX® 2400 Truck Mounted Water Well & Geothermal Drill Rig

The DRILLMAX® 2400 Water Well & Geothermal Drill Rig is mounted on a 66,000 gvw truck with many options for mud pump and air compressor.  Rated at 1500-ft. and a table opening to set 24-in. casing the rig can be used for water well, geothermal or cathodic protection drilling.  The DRILLMAX® 2400 has 45,000 lbs of pullback and a 15,000 lb winch with 2 part line giving it the power and speed to handle a large variety of work.

Specifications

DRILLMAX 2400 Water Well & Geothermal Drill Rig

SUB FRAME
Construction: 22 ft. in length, 8 ft. in width
Component supporting sub frame with integral retractable table providing 24 in. opening for casing placement.
MAST
Construction: 35 ft. length
Sealed bearing hoisting system with internally protected cylinder.
DRILL POWER
PTO driven by heavy-duty oil flooded pump drive gear case with direct coupling to all hydraulic pumps.
HYDRAULIC SYSTEM
Independent systems for each main circuit allowing for continuous drilling operations while handling drill pipe.
Includes 140 gal. hydraulic tank with oil cooler and filtration.
FEED SYSTEM
Type: Hydraulic cylinder with leaf chain drive
Stroke 28 ft.
Rated Pullback* 45,000 lbs.
Rated Pulldown Pressure 25,000lbs
ROTARY HEAD
Type: Top drive oil flooded gearbox with integral 3 in. adjustable swivel
Speed: Available up to 300 RPM
Torque: Available up to 120,000 in-lbs.
STANDARD PIPE HANDLING EQUIPMENT
Holding wrench Air Operated
Breakout Cylinder Hydraulic cylinder with 60 in. adjustable wrench
Winch 15,000 lbs. capacity with 180 ft. x 5/8 in. non-rotating wire rope and safety hook
JIB Boom Hydraulically swings and extends to hole center and pipe loader
LEVELING JACKS
Rear Two 36 in. stroke
Front Two 48 in. stroke
TRUCK CHASSIS (Standard)
IHC 7600 Series with 425 HP, 13 speed transmission
WEIGHT
Approximate operating weight 57,000 lbs.
Equipped with 1170/350 Air
DIMENSIONS
Length 37 ft.
Width 8 ft.
Height 13 ft. 5 in.
OPTIONAL EQUIPMENT
Mud Pump: Hydrastatic driven up to 5 1/2 x 8 Duplex and up to 3 x 4 x 13 Centrifugal
Air Compressor: Hydrastatic driven 500 CFM at 200 PSI or 1170/350 with self-contained power unit
Drill Pipe Rack for 500 ft. of 3 1/2 in. x 20 ft.
Single Rod Loaders or Casing Hammer Package
*May require carrier due to weight

Photo Gallery

Click on a photo to view a larger version.

Literature

Find Out More

Fill out the contact form below to find out more about this rig.


DRILLMAX® 250DRILLMAX® 350DRILLMAX® 400DRILLMAX® 450DRILLMAX® 2400DRILLMAX® 2500General InformationUsed Machines

Contact us

DRILLMAX®
5801 SW 6th Place
Ocala, FL 34474

Phone: (352) 854-1566
Fax: (352) 237-0450

Follow Us