DRILLMAX® 400 RIG

DRILLMAX® 400 Drilling Rig for Residential Water Wells or Geothermal Drilling

The DRILLMAX® 400 is mounted on a single axle 4×4 truck.  It’s short wheel base make a great rig for residential water wells up to 12-in. in diameter or geothermal drilling on tough to get into job sites.  Set this rig up with 435/200 air or 5×6 mud pump.  Carry up to 400-ft. of drill pipe on board and choose from the single rod loader or CMAX carousel option.

Specifications

DRILLMAX 400 Residential Water Wells & Geothermal Drilling

SUB FRAME
Construction: 15 ft. in length
Component supporting sub frame with integral retractable table providing 16 in. opening for casing placement.
MAST
Construction: 30 ft. length
Sealed bearing hoisting system with internally protected cylinder.
Retract table provides 16 ft. opening.
DRILL POWER
PTO driven by heavy-duty oil flooded pump drive gear case with direct coupling to all hydraulic pumps.
HYDRAULIC SYSTEM
Independent systems for each main circuit allowing for continuous drilling operations while handling drill pipe.
Includes 85 gal. hydraulic tank with oil cooler and filtration.
FEED SYSTEM
Type: Hydraulic cylinder with leaf chain drive
Stroke 24 ft.
Rated Pullback* 15,000 lbs.
Rated Pulldown Pressure 10,000 lbs.
ROTARY HEAD
Type: Top drive oil flooded gearbox with integral 2 in. adjustable swivel
Speed: Available up to 300 RPM
Torque: Available up to 63,000 in./lbs.
STANDARD PIPE HANDLING EQUIPMENT
Holding wrench Air Operated
Breakout Cylinder Hydraulic cylinder with 48 in. adjustable wrench
Winch 7,500 lbs. capacity with 100 ft. x 1/2 in. non-rotating wire rope and safety hook
JIB Boom Hydraulically swings and extends to center over pipe rack loader
LEVELING JACKS
Rear Two 30 in. stroke
Front Two 36 in. stroke
TRUCK CHASSIS (Standard)
International 7300 with 300 hp
WEIGHT
Approximate operating weight – 32,000 lbs.
Equipped with 3×4 Centrifugal and 300/200 Air
DIMENSIONS
Length 31 ft.
Width 8 ft.
Height 11 ft.
OPTIONAL EQUIPMENT
Mud Pump: Hydrastatic driven up to 5 x 6 Duplex or 3 x 4 x 13 Centrifugal
Air Compressor: Hydrastatic driven 500 CFM at 200 PSI
*When used with Duplex Pump
Drill Pipe Rack for 300 ft. of 2 7/8 in. x 20 ft.
CMAX Semi-Automatic drill pipe loading system with up to 15 pieces (300 ft) 2 7/8 in. drill pipe

Photo Gallery

Click on a photo to view a larger version.

Literature

Find Out More

Fill out the contact form below to find out more about this rig.


DRILLMAX® 250DRILLMAX® 350DRILLMAX® 400DRILLMAX® 450DRILLMAX® 2400DRILLMAX® 2500General InformationUsed Machines

Contact us

DRILLMAX®
5801 SW 6th Place
Ocala, FL 34474

Phone: (352) 854-1566
Fax: (352) 237-0450

Follow Us